Injection moulding machines > System solution > Product group
Special features
The maximum operating pressure is applied via only a short stroke and simultaneously with minimum stroke speed. In this operating condition, only an insufficient oil film is left under the sealing edge.
- The sealing material PTFEGM201 (PTFE glass MoS2 those sliding characteristics of PTFE that are also favourable in connection with deficient lubrication with a neutral behaviour vis-à-vis the counterface. compound) unites precisely
Due to the high stroke speed, especially in the case of depressurised operation, a comparatively heavy hydraulic oil film remains on the counterface. At the same time, with each stroke a reasonable amount of hydraulic medium is transported on the basis of the stroke length.
- With the use of OMS-MRPR, a permanent pressure build-up in the clearance between the primary and the secondary seal is safely
